PRODUCT CATALOGUE - drywall

3/8" Regular Drywall Gypsum Panel - 4' x 8'

Regular Gypsum Drywall is an interior panel composed of a naturally noncombustible, dimensionally stable, gypsum core.  The core is wrapped in high quality 100% recycled facing and backing paper that will accept most decorative finishes. Regular Gypsum Wallboard is intended for non-fire rated residential construction(1.3lb/ft ²).

Primary Uses:

• Interior, Non-Structural, Non-fire rated walls, ceilings and partiction applicatons
• New or renovation projects with frame spacing not more than 24" on center
• Wall comvering material for flat or curved walls
• May be formed into a curve on a short radius
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

4' x 12' x 1/2 Ceiling Drywall

Ceiling Drywall or Gypsum Panels are designed for interior ceiling applications where there is a higher demand for sag resistant performance.

These superior-grade panels are only 1/2" thick, but offer significantly improved resistance to sag when compared to 1/2" Standard or 5/8" Type X gypsum panels. Interior Ceiling Drywall weighs less, which promotes ease of handling and installation. They can be attached with long edges parallel or perpendicular to framing to increase the speed of installation. It is code for ceilings with framing spacing greater than 19" OC.

5/8" Firecode Core (Type X) Drywall Gypsum Panel - 4’ x 8'

Use the original, most trusted and widely used Type X gypsum panels on the market.

Firecode® X Gypsum Panels are composed of fire-resistant gypsum core encased in 100-percent recycled natural-finish face paper and 100-percent recycled liner paper on the back. These panels score and snap easily for quick installation of interior wall and ceiling applications, allowing painting, decorating and the installation of metal or wood almost immediately.

Benefits are:

• Fire-Resistant Dry Construction
• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

5/8" Firecode Core (Type X) Drywall Gypsum Panel - 4’ x 9'

Use the original, most trusted and widely used Type X gypsum panels on the market.

Firecode® X Gypsum Panels are composed of fire-resistant gypsum core encased in 100-percent recycled natural-finish face paper and 100-percent recycled liner paper on the back. These panels score and snap easily for quick installation of interior wall and ceiling applications, allowing painting, decorating and the installation of metal or wood almost immediately.

Benefits are:

• Fire-Resistant Dry Construction
• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

5/8" Firecode Core (Type X) Drywall Gypsum Panel - 4' x 10' 

Use the original, most trusted and widely used Type X gypsum panels on the market.

Firecode® X Gypsum Panels are composed of fire-resistant gypsum core encased in 100-percent recycled natural-finish face paper and 100-percent recycled liner paper on the back. These panels score and snap easily for quick installation of interior wall and ceiling applications, allowing painting, decorating and the installation of metal or wood almost immediately.

Benefits are:

• Fire-Resistant Dry Construction
• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

5/8" Firecode Core (Type X) Drywall Gypsum Panel - 4’ x 12' 

Use the original, most trusted and widely used Type X gypsum panels on the market.

Firecode® X Gypsum Panels are composed of fire-resistant gypsum core encased in 100-percent recycled natural-finish face paper and 100-percent recycled liner paper on the back. These panels score and snap easily for quick installation of interior wall and ceiling applications, allowing painting, decorating and the installation of metal or wood almost immediately.

Benefits are:

• Fire-Resistant Dry Construction
• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

5/8" Light Weight Firecode Core (Type X) Drywall Gypsum Panel - 4' x 8' 

Fire rated wallboard is used for interior walls and ceilings in residential and commercial applications that require specific fire rated assemblies. It is designed for direct attachment by screws, nails or adhesive to wood or metal framing and even existing surfaces.

Type X & Type C gypsum panels are 3rd party certified for fire ratings of up to 4 hours in walls, 3 hours in ceilings and 4 hours for column protection.

Benefits are:

• Fire-Resistant dry construction for interior use in areas near heat sources (furnaces, wood stoves, etc.), garages and main living areas.
• Quicker and easier installation
• Easy to score and snap
• Tapered edges for cleaner finishing
• Once primed, can be painted, wallpapered, or textured, like regular drywall, for the desired look

5/8" Light Weight Firecode Core (Type X) Drywall Gypsum Panel - 4' x 9' 

Fire rated wallboard is used for interior walls and ceilings in residential and commercial applications that require specific fire rated assemblies. It is designed for direct attachment by screws, nails or adhesive to wood or metal framing and even existing surfaces.

Type X & Type C gypsum panels are 3rd party certified for fire ratings of up to 4 hours in walls, 3 hours in ceilings and 4 hours for column protection.

Benefits are:

• Fire-Resistant dry construction for interior use in areas near heat sources (furnaces, wood stoves, etc.), garages and main living areas.
• Quicker and easier installation
• Easy to score and snap
• Tapered edges for cleaner finishing
• Once primed, can be painted, wallpapered, or textured, like regular drywall, for the desired look

5/8" Light Weight Firecode Core (Type X) Drywall Gypsum Panel - 4' x 10' 

Fire rated wallboard is used for interior walls and ceilings in residential and commercial applications that require specific fire rated assemblies. It is designed for direct attachment by screws, nails or adhesive to wood or metal framing and even existing surfaces.

Type X & Type C gypsum panels are 3rd party certified for fire ratings of up to 4 hours in walls, 3 hours in ceilings and 4 hours for column protection.

Benefits are:

• Fire-Resistant dry construction for interior use in areas near heat sources (furnaces, wood stoves, etc.), garages and main living areas.
• Quicker and easier installation
• Easy to score and snap
• Tapered edges for cleaner finishing
• Once primed, can be painted, wallpapered, or textured, like regular drywall, for the desired look

5/8" Light Weight Firecode Core (Type X) Drywall Gypsum Panel - 4' x 12' 

Fire rated wallboard is used for interior walls and ceilings in residential and commercial applications that require specific fire rated assemblies. It is designed for direct attachment by screws, nails or adhesive to wood or metal framing and even existing surfaces.

Type X & Type C gypsum panels are 3rd party certified for fire ratings of up to 4 hours in walls, 3 hours in ceilings and 4 hours for column protection.

Benefits are:

• Fire-Resistant dry construction for interior use in areas near heat sources (furnaces, wood stoves, etc.), garages and main living areas.
• Quicker and easier installation
• Easy to score and snap
• Tapered edges for cleaner finishing
• Once primed, can be painted, wallpapered, or textured, like regular drywall, for the desired look

This product is developed with additives that support the integrity of the core under fire exposure, resulting in improved fire protection over standard gypsum panels.

Systems using SHEETROCK® Brand FIRECODE® Type X & Type C Gypsum Panels qualified for fire ratings of up to 4 hours in walls, 3 hours in ceilings and 4 hours for column protection. 

Benefits are:

• Fire-Resistant Dry Construction
• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

USG - 5/8" SHEETROCK UltraLight Firecode 30 Drywall Gypsum Panel - 4' x 12' (see Delivery Disclaimer)

Weighing 30% less than standard 5/8" Type X panels, these are easier to carry, lift and install.   

USG Sheetrock® Brand UltraLight Panels Firecode® 30 are ideal for interior applications where 15.9mm (5/8") Type X panels are not required. Formulated for comparable strength and performance, these panels feature an engineered core encased in proprietary 100% recycled face and back papers for a high strength-to-weight ratio composite design.

Benefits are:

• Up to 30% lighter than standard 5/8" Type X gypsum panels
• Easier to lift, carry and install
• Lighter weight speeds installation
• 30-minute single layer steel and wood framed, and ‘one hour’ double layer steel framed fire-rated wall systems (ULC design W 496 and CUL design U 407)
• Tapered Edges for Cleaner Finishing
• Strength and impact resistance comparable with standard 5/8" Type X.

1/2” Cement Board - 3’ x 5'

Cement Board offers a strong, water-durable tile base for floors, walls, countertops, tubs and shower areas. 

Cement Board is moisture and mold resistant, making it the perfect choice for tile and flooring in baths, kitchens, and laundry rooms. These cut easily,  

Benefits are:

• Lightest cement board in the industry
• Environmentally sustainable – lower weight reduces embodied energy and emissions
• Water-durable, mold-resistant substrate for high moisture areas
• Will not rot., warp, delaminate or disintegrate
• Easy to cut and fasten
• Noncombustible

Benefits are:

• Lightest cement board in the industry
• Environmentally sustainable – lower weight reduces embodied energy and emissions
• Water-durable, mold-resistant substrate for high moisture areas
• Will not rot., warp, delaminate or disintegrate
• Easy to cut and fasten
• Noncombustible

1/2” Cement Board - 4’ x 8'

Cement Board offers a strong, water-durable tile base for floors, walls, counter tops, tubs and shower areas.

Cement Board is moisture and mold resistant, making it the perfect choice for tile and flooring in baths, kitchens, and laundry rooms. These cut easily,  

Benefits are:

• Lightest cement board in the industry
• Environmentally sustainable – lower weight reduces embodied energy and emissions
• Water-durable, mold-resistant substrate for high moisture areas
• Will not rot., warp, delaminate, or disintegrate
• Easy to cut and fasten
• Noncombustible

4' x 8' x 1/2" Tile Backer

Tile Backer is designed for use as a substrate for tile walls, ceilings, countertops, as well as commercial and residential floor applications (i.e., high moisture areas). The special moisture-resistant, treated core (covered front and back by fiberglass mats) is lighter than the leading cement board. The unique construction (an outer gray heat-cured, copolymer, moisture-resistant coating placed over fiberglass mats and a moisture-resistant, treated core) makes it the preferred product for applications in high moisture areas.

Applications:

• In bathrooms (i.e., shower and tub walls, floors and ceilings)
• In kitchens (i.e., backsplash, walls, countertops, and flooring)
• Residential or commercial flooring (in areas of high moisture)
• Non-tiled walls and ceilings in indoor swimming pool enclosures
• Residential steam rooms

1/2" DensShield Tile Backer, 4' x 8'

DensShield Tile Backer is designed for use as a substrate, in high moisture areas, on walls (as a tile backer), ceilings, counter-tops as well as commercial and residential floor applications.

The special moisture-resistant, treated core  (covered front and back by fiberglass mats) is lighter than the leading cement board. The unique construction (an outer gray heat-cured, co-polymer, moisture-resistant coating placed over fiberglass mats and a moisture-resistant, treated core) makes it a  preferred product for applications in high moisture areas.

Applications:

• Bathrooms (shower and tub walls, floors and ceilings)
• Kitchens (back-splash, walls, counter-tops and floors)
• Residential and light commercial floors
• Non-tiled walls and ceilings in indoor swimming pool enclosures
• Residential steam rooms

• Bathrooms (shower and tub walls, floors and ceilings)
• Kitchens (back splash, walls, counter-tops and floors)
• Residential and light commercial floors
• Non-tiled walls and ceilings in indoor swimming pool enclosures
• Residential steam rooms (see GP's YouTube video for tips on DensShield Installation)

1/2” Mold Tough Drywall Gypsum Panel - 4’ x 8’

Offers moisture and mold resistance for use in high humidity areas such as basements, garages, bathrooms, laundry rooms, etc. Used for wall and ceiling applications.

Mold Tough® Gypsum Panels have a noncombustible, fire and moisture resistant gypsum core encased in moisture and mold-resistant, 100-percent recycled green face and brown back paper.

Benefits are:

• Tapered Edges for Easy Installation and Finishing
• Score and snap easily; no special handling required
• Qualify as Water-Resistant Gypsum Backing Boards as defined in ASTM C 1396
• Manufacture per ASTM D3273 for mold resistance. The panel scores a 10.

 
Also available in 5/8" Firecode® Core (Type X) panels (please inquire)

1/2” Mold Tough Drywall Gypsum Panel - 4’ x 10’

Offers moisture and mold resistance for use in high humidity areas such as basements, garages, bathrooms, laundry rooms, etc. Used for wall and ceiling applications.

Mold Tough® Gypsum Panels have a noncombustible, fire and moisture resistant gypsum core encased in moisture and mold-resistant, 100-percent recycled green face and brown back paper.

Benefits are:

• Tapered Edges for Easy Installation and Finishing
• Score and snap easily; no special handling required
• Qualify as Water-Resistant Gypsum Backing Boards as defined in ASTM C 1396
• Manufacture per ASTM D3273 for mold resistance. The panel scores a 10.

 
Also available in 5/8" Firecode® Core (Type X) panels (please inquire)

5/8” Mold Tough Drywall Gypsum Panel - 4’ x 8’

Offers moisture and mold resistance for use in high humidity areas such as basements, garages, bathrooms, laundry rooms, etc. Used for wall and ceiling applications.

Mold Tough® Gypsum Panels have a noncombustible, fire and moisture resistant gypsum core encased in moisture and mold-resistant, 100-percent recycled green face and brown back paper.

Benefits are:

• Tapered Edges for Easy Installation and Finishing
• Score and snap easily; no special handling required
• Qualify as Water-Resistant Gypsum Backing Boards as defined in ASTM C 1396
• Manufacture per ASTM D3273 for mold resistance. The panel scores a 10.
• 5/8” Firecode® Core (Type X) panel

5/8” Mold Tough Drywall Gypsum Panel, 4’ x 10’

Offers moisture and mold resistance for use in high humidity areas such as basements, garages, bathrooms, laundry rooms, etc. Used for wall and ceiling applications.

Mold Tough® Gypsum Panels have a noncombustible, fire and moisture resistant gypsum core encased in moisture and mold-resistant, 100-percent recycled green face and brown back paper.

Benefits are:

• Tapered Edges for Easy Installation and Finishing
• Score and snap easily; no special handling required
• Qualify as Water-Resistant Gypsum Backing Boards as defined in ASTM C 1396
• Manufacture per ASTM D3273 for mold resistance. The panel scores a 10.
• 5/8” Firecode® Core (Type X) panels

USG – 5/8” SHEETROCK Mold Tough Drywall Gypsum Panel - 4’ x 12’ (see Delivery Disclaimer)

Offers moisture and mold resistance for use in high humidity areas such as basements, garages, bathrooms, laundry rooms, etc. Used for wall and ceiling applications. 

SHEETROCK® Brand Mold Tough® Gypsum Panels have a noncombustible, fire and moisture resistant gypsum core encased in moisture and mold-resistant, 100-percent recycled green face and brown back paper.

Benefits are:

• Tapered Edges for Easy Installation and Finishing
• Score and snap easily; no special handling required
• Qualify as Water-Resistant Gypsum Backing Boards as defined in ASTM C 1396
• Manufacture per ASTM D3273 for mold resistance. The panel scores a 10.
• 5/8” Firecode® Core (Type X) panels

4' x 8' x 1/2" Mold & Moisture Resistant Drywall

Mold & Moisture Resistant drywall has the ability to withstand moisture and mold making it suitable for use in high humidity areas such as basements, garages, bathrooms, laundry rooms. Can be used for both wall and ceiling applications.

These panels have a non-combustible, fire and moisture resistant gypsum core encased in moisture and mold resistant, 100-percent recycled green-face and brown-back paper.

Benefits are:

• Tapered Edges for Easy Installation and Finishing
• Score and snap easily; no special handling required
• Fire and moisture resistant for added safety

USG – 1/2” SHEETROCK Mold Tough Drywall Gypsum Panel - 4’ x 12' (see Delivery Disclaimer)

Offers moisture and mold resistance for use in high humidity areas such as basements, garages, bathrooms, laundry rooms, etc. Used for wall and ceiling applications. 

SHEETROCK® Brand Mold Tough® Gypsum Panels have a noncombustible, fire and moisture resistant gypsum core encased in moisture and mold-resistant, 100-percent recycled green face and brown back paper.

Benefits are:

• Tapered Edges for Easy Installation and Finishing
• Score and snap easily; no special handling required
• Qualify as Water-Resistant Gypsum Backing Boards as defined in ASTM C 1396
• Manufacture per ASTM D3273 for mold resistance. The panel scores a 10.

 
Also available in 5/8" Firecode® Core (Type X) panels (please inquire).

• Mold resistant - scores a 10 (highest score) when tested in accordance with ASTM D3272
• Water resistant gypsum core with water-shedding glass mat on both sides
• Quick and easy installation
• Simple score & snap, no sawing or special tools required
• Can be exposed to weather for up to 12 months, and are also guaranteed for three years against manufacturing defects.
  

• Mold resistant - scores a 10 (highest score) when tested in accordance with ASTM D3272
• Water resistant gypsum core with water-shedding glass mat on both sides
• Quick and easy installation
• Simple score & snap, no sawing or special tools required
• Can be exposed to weather for up to 12 months, and are also guaranteed for three years against manufacturing defects.
  

1/2" Regular Light Weight Drywall - 4' x 8'

Introducing the first and only certified sag-resistant lightweight wallboard that is ICC certified for both walls and ceilings.

UltraLight Panels are the lightest ½ inch wallboard panels available, weighing up to 10 pounds less per 12' sheet. UltraLight Panels are the only lightweight ½ inch wallboard panels that are building code approved for ceiling installations, meaning only one type of ½ inch panel is needed for a typical project (excluding wet areas).

Benefits are:

• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

UltraLight Panels are the lightest ½ inch wallboard panels available, weighing up to 10 pounds less per 12' sheet. UltraLight Panels are the only lightweight ½ inch wallboard panels that are building code approved for ceiling installations, meaning only one type of ½ inch panel is needed for a typical project (excluding wet areas).

Benefits are:

• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

1/2" Regular Light Weight Drywall - 4' x 10'

Introducing the first and only certified sag-resistant lightweight wallboard that is ICC certified for both walls and ceilings.

UltraLight Panels are the lightest ½ inch wallboard panels available, weighing up to 10 pounds less per 12' sheet. UltraLight Panels are the only lightweight ½ inch wallboard panels that are building code approved for ceiling installations, meaning only one type of ½ inch panel is needed for a typical project (excluding wet areas).

Benefits are:

• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

1/2" Regular Light Weight Drywall - 4' x 12'

Introducing the first and only certified sag-resistant lightweight wallboard that is ICC certified for both walls and ceilings.

UltraLight Panels are the lightest ½ inch wallboard panels available, weighing up to 10 pounds less per 12' sheet. UltraLight Panels are the only lightweight ½ inch wallboard panels that are building code approved for ceiling installations, meaning only one type of ½ inch panel is needed for a typical project (excluding wet areas).

Benefits are:

• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look. 

4 x 8' x 1/2" Lightweight Drywall

These panels are lightweight 1/2" wallboard panels.

Benefits are:

• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look.

4 x 10' x 1/2" Lightweight Drywall

These panels are lightweight 1/2" wallboard panels.

Benefits are:

• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look.

4 x 12' x 1/2" Lightweight Drywall

These panels are lightweight 1/2" wallboard panels.

Benefits are:

• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look.

Introducing the first and only certified sag-resistant lightweight wallboard that is ICC certified for both walls and ceilings.

The 54" wide UltraLight gypsum panel was developed in response to modern construction trends which feature 9' ceilings. Use of this sized panel avoids an additional joint, which was previously required when using 4' drywall sheets, eliminating further cutting, taping and finishing. Two 54" gypsum panels add up to the perfect 9 foot wall.

Benefits are:

• Quicker and Easier Installation
• Reduces Strain and Fatigue
• Easy to Score and Snap
• Tapered Edges for Cleaner Finishing
• Once primed, can be Painted, Wallpapered, or Textured for the desired look.